Max height of 5 ft during game Each block is (L) 7in x (W) 2.31in x (H) 1.12in Starts over 2.5ft tall (24in blocks and 8in game table = 32in total). □ 60 GIANT BLOCKS: That’s 6 extra blocks versus the classic board game (Hint:Rhymes with Zenga).Varnished and sealed to withstand the splashes, humidity, and heat. □ WATER & WEATHER RESISTANT – Whether it’s for the game room, by the pool or at the beach.Now you can play faster and build taller! ✅ PROPRIETARY SMOOTH PULL FINISH – Over 40% easier to slide blocks out with our exclusive Smooth-Pull finish! Sticking blocks make the game frustrating and short.Lifetime Warranty covers splitting, cracking, twisting, and warping. Oversized blocks and crate have meticulously rounded edges with an extra smooth finish. ♻ RECLAIMED WOOD: Sustainably Sourced, refinished, and upcycled New Zealand Pine.Make sure to check out this Summer Bucket List for Kids and how to make DIY Kubb Yard Game and DIY Molkky Yard Game too. Now you’re ready to roll ‘n go and play jumbo jenga for hours of fun! Paint each of the 6 sides a different color (one side will stay natural wood.) After the paint has dried, lightly sand the edges to distress as desired. Making the DiceĬut a piece of 4×4 to a cube, 3 1/2″ x 3 1/2″ x 3 1/2″. After the glue has dried, sand the carrying crate smooth, especially the top/bottom where the jumbo jenga will be stacked to play the game. If you want to add handles, add one to each side. Attach another ‘top/bottom’ board right by the other ‘top/bottom’ board and secure it to the ‘short side’ board with 1 1/4″ screws.Īttach the last ‘long side’ board with wood glue and 1 1/4″ screws to the ‘short side’ and ‘top/bottom’ boards. Use 1 1/4″ minimum to secure a ‘top/bottom’ board to the ‘long side’ board as shown.Īdd a bead of wood glue to 2 sides of the ‘short side’ boards and attach it to the ‘long side’ and ‘top/bottom’ boards with 1 1/4″ screws. The holes should be about 3/8″ away from the side and evenly spaced.Īdd a bead of wood glue along one of the sides of a ‘long side’ board. Use a countersink bit (or a regular drill bit about the size of the screw shank) and drill holes for the screws as shown in the sketch. One set of 9 blocks I left natural wood.Ĭut the 4 pieces of 1×8 to be 19 3/4″ long. I had my helpers paint 9 jumbo jenga blocks in each color. (If you leave them natural wood you won’t have this issue.) You can coat them with a clear coat or wait until the paint has fully cured. So the blocks want to stick to each other. One issue with latex is that it dries in a day, but doesn’t cure for a few weeks. I used latex paint (ultra pure white, the real teal, pimento, paradise sky and cherries jubile). Paint or stain the jumbo jenga blocks if desired. I used a belt sander for this part to make it faster, a regular hand sander will work too. (Sometimes those kids toys can be useful :-) ). I used a miter saw and set up a stop block on the left side so I didn’t have to measure every piece.Ĭut 54 jumbo jenga pieces.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |